carcustomz headlight protection

Friday, October 1, 2010

Auto Plastic Headlight Restoration

One of the characteristics of a car that continues to look new even after it's a few years old is the condition of its headlights. On new cars, the headlight lenses are crystal clear, but on cars with even a couple of years on them the headlight lenses may be cloudy. Auto plastic headlight restoration is a way to get your car looking new once again.

Ultraviolet rays from the sun, acid rain, road salts, and plain dirt and debris all affect the condition of your car's headlight lenses. Another factor affecting some newer models is halogen headlights. Halogen headlights run at a very high temperature, and this also contributes to deterioration of the condition of the headlights. Fortunately, it's pretty easy to make headlights look new again with plastic headlight lens restoration. The process usually takes 15 to 30 minutes per lens.

The Need for Auto Plastic Headlight Restoration

Headlights on today's cars come in a sealed unit, which unfortunately means that you can't simply replace the clear plastic part. Higher-end car models often have high-performance lights that are very expensive to replace. With auto plastic headlight restoration kits, you can save hundreds of dollars per lens, whether you use a total DIY approach with wet sandpaper, or even if you purchase a ready made kit for cleaning your headlights. Sometimes headlight lenses are cloudy and oxidized enough that replacement really is the only option, but restoring the lenses is definitely worth a try first. If you want to be sure you'll get good results from restoring your headlights yourself, you can test out a small amount of CarTaract plastic headlight restoration kit on part of the lens. If you see improvement in your test spot, then you can expect good results.

Why Auto Plastic Headlight Restoration?

Wet, 2000 grit sandpaper and soapy water are the main tools for a DIY approach to cleaning your headlights. The sandpaper is easiest to use if you soak it in the soapy water for 15 minutes or so before using. Don't sand with just your hands. Use a pad or sanding block. Some people get good results by using a rectangular rubber school eraser.

Do not use household glass cleaner that contains ammonia on your plastic headlights. Ammonia is known to cause clear plastic to turn yellow, and it will only make your headlights worse. Once you're through sanding the lenses, use plastic polish on a foam or wool pad to buff the lenses. To maintain your clear headlights, clean them monthly with plastic cleaner like Plexus to keep them looking great.
Article Source:


Post a Comment